Guides

The boiler replacement quote checklist

A combi swap looks simple until the flue needs an extension, the condensate has nowhere to go and the gas pipe is undersized. Price them on the visit, not on the day.

By Chris M, Director, AI MetricUpdated 21 November 20262 minute read

In short

  • The boiler, its warranty terms, and any option to upgrade.
  • Flue kit and extensions, magnetic filter, system clean, controls, condensate route.
  • Gas supply checked and sized, by a Gas Safe registered engineer.
  • Building Regulations notification and the commissioning record.
  • Removal, disposal and making good.

The checklist

The boiler

  • Make, model and output, matched to the property and hot water demand.
  • Warranty length and its conditions, such as an annual service or a filter being fitted.
  • Options: a second boiler at a different price, or a longer warranty.

Flue

  • Flue kit, and any extensions, bends or a plume kit.
  • Terminal position checked against clearances to windows, doors and boundaries.
  • Access to fit it: ladders, a tower or scaffold for a high flue.

System protection

  • Magnetic filter.
  • System clean: chemical clean or power flush, as the system needs.
  • Inhibitor dosed after refilling.

Controls

  • Programmer, room thermostat or smart control, and TRVs if required.
  • Check the controls the current Building Regulations require for the installation, and include them.

Condensate

  • Route to a suitable drain, internal where possible.
  • Pipe size and insulation for any external run, so it does not freeze.

Gas supply

  • Pipe size from the meter checked against the new boiler's demand.
  • Any upgrade priced, not left for the day.
  • All gas work by a Gas Safe registered engineer.

Electrics

  • Fused spur for the boiler, and wiring for controls.

Notification and paperwork

  • Building Regulations notification for the installation.
  • The commissioning record and manufacturer warranty registration.

Removal and making good

  • Remove and dispose of the old boiler, flue and any redundant tanks or cylinder.
  • Make good the old flue hole and any pipework chases, to a stated standard.

Wording the unknowns

Two things you may not know until the old boiler is off: the state of the system, and whether the existing pipework is in good order. Say what you have allowed for, and how anything beyond it will be agreed:

"Price includes a chemical clean of the system. If the system needs a power flush instead, we will tell you before carrying it out. Price: £x."

VAT

A gas boiler replacement is standard rated if you are VAT registered. The zero rate for energy saving materials until 31 March 2027 applies to qualifying items such as heat pumps, not gas boilers. Read VAT on trade quotes.

How Quote Metric helps

When a visit mentions a boiler or combi, Quote Metric's plumbing and heating pack asks about the flue kit, the magnetic filter, the system clean, controls, the condensate route, the gas supply and the Building Regulations notification, and holds the quote until each is priced, excluded or not needed. See the plumbing and heating pack.

Common questions

Should I quote the boiler at my cost or with a markup?

With a markup. You are ordering, collecting, fitting and standing behind it. Show the customer one price for the boiler supplied and fitted, or line by line, but price in your time and risk. Read markup vs margin.

How long should a boiler quote be valid?

Match it to your merchant's quote, often 30 days. Boiler prices change, and a validity date protects you.

Checked and updated 21 November 2026. Found something out of date? Email chris@ai-metric.com.

Walk it. Talk it. Quote it.

Quote Metric is in early access for UK trades. 7 day trial, then from £2.99 a month.